3Com S7902E Command Reference Manual - page 1178
1-21
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Examples
# In the public instance view the information of join/prune messages to send in the PIM-SM mode.
VPN-Instance: public net
Expiry Time: 50 sec
Upstream nbr: 10.1.1.1 (Vlan-interface1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1
Table 1-7 display pim join-prune
command output description
Field
Description
VPN-Instance: public net
Public instance
Expiry Time:
Expiry time of sending join/prune messages
Upstream nbr:
IP address of the upstream PIM neighbor and the
interface connecting to it
(*, G) join(s)
Number of (*, G) joins to send
(S, G) join(s)
Number of (S, G) joins to send
(S, G, rpt) prune(s)
Number of (S, G, rpt) prunes
display pim neighbor
Syntax
display pim
[
all-instance
|
vpn-instance vpn-instance-name
]
neighbor
[
interface
interface-type
interface-number
|
neighbor-address
|
verbose
] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
interface-type
interface-number
: Displays the PIM neighbor information on a particular interface.
neighbor-address
: Displays the information of a particular PIM neighbor.
verbose
: Displays the detailed PIM neighbor information.