3Com S7902E Command Reference Manual - page 1440
1-18
display bgp ipv6 multicast routing-table community
Syntax
display bgp ipv6 multicast routing-table community
[
aa:nn
& ]
[
no-advertise
|
no-export
|
no-export-subconfed
] * [
whole-match
]
View
Any view
Default Level
1: Monitor level
Parameters
aa:nn
: Community number; both
aa
and
nn
are in the range 0 to 65535.
&: Indicates that you can provide up to 13 community numbers.
no-advertise
: Displays IPv6 MBGP routes that cannot be advertised to any peer.
no-export
: Displays IPv6 MBGP routes that cannot be advertised out the AS. If a confederation is
configured, it displays routes that cannot be advertised out the confederation, but can be advertised to
other sub-ASs in the confederation.
no-export-subconfed
: Displays IPv6 MBGP routes that cannot be advertised out the local AS, or to
other sub-ASs in the confederation.
whole-match
: Displays the IPv6 MBGP routes exactly matching the specified community
attribute.
Description
Use the
display bgp ipv6 multicast routing-table community
command to display the IPv6 MBGP
routing information with the specified IPv6 MBGP community attribute.
Examples
# Display IPv6 MBGP routing information with the community attribute
no-export
.
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Refer to
Table 1-7
for description on the fields above.