3Com S7902E Command Reference Manual - page 1969
1-8
F : Current operation user work in async mode.
Table 1-2
Descriptions on the fields of the
display users
command
Field
Description
+
The information displayed is about the current user interface.
F
The information is about the current user interface, and the current
user interface operates in asynchronous mode.
UI
The numbers in the left sub-column are the absolute user interface
indexes, and those in the right sub-column are the relative user
interface indexes.
Delay
The period in seconds the user interface idles for.
Type User
type
Userlevel
The level of the commands available to the users logging into the
user interface
Location
The IP address form which the user logs in.
User name
The login name of the user that logs into the user interface.
escape-key
Syntax
escape-key
{
default
|
character
}
undo escape-key
View
User interface view
Default Level
3: Manage level
Parameters
default
: Restores the default escape key combination
character
: Specifies the shortcut key for aborting a task, a single character (or its corresponding ASCII
code value in the range 0 to 127) or a string of 1 to 3 characters.
Description
Use the
escape-key
command to define a shortcut key for aborting tasks.
Use the
undo escape-key
command to restore the default shortcut key.
You can use a single character (or its corresponding ASCII code value in the range 0 to 127) or a string
of 1 to 3 characters to define a shortcut key. But in fact, only the first character functions as the shortcut
key. For example, if you enter an ASCII value 113, the system will use its corresponding character
as the shortcut key; if you input the string
q@c
, the system will use the first letter as the shortcut
key.
By default, you can use
display current-configuration
command to verify the shortcut key you have defined.