3Com S7902E Command Reference Manual - Dldp Configuration Commands
1-1
1
DLDP Configuration Commands
DLDP Configuration Commands
display dldp
Syntax
display dldp
[
interface-type interface-number
]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number
: Port type and port number.
Description
Use the
display dldp
command to display the DLDP configuration of a port.
If you do not provide the
interface-type
or
interface-number
arguments, this command displays the
DLDP configuration of all the DLDP-enabled ports.
Examples
# Display the DLDP configuration of all the DLDP-enabled ports.
DLDP global status : enable
DLDP interval : 5s
DLDP work-mode : enhance
DLDP authentication-mode : simple, password is 123
DLDP unidirectional-shutdown : auto
DLDP delaydown-timer : 2s
The number of enabled ports is 2.
Interface GigabitEthernet2/0/1
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0100
Neighbor port index : 79
Neighbor state : two way
Neighbor aged time : 13