3Com S7902E Command Reference Manual - page 1973
1-12
Description
Use the
idle-timeout
command to set the timeout time. The connection to a user interface is terminated
if no operation is performed in the user interface within the specified period.
Use the
undo idle-timeout
command to revert to the default timeout time.
You can use the
idle-timeout
0 command to disable the timeout function.
The default timeout time is 10 minutes.
Examples
# Set the timeout time of AUX 0 to 1 minute.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] idle-timeout 1 0
lock
Syntax
lock
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the
lock
command to lock the current user interface to prevent unauthorized users from operating
the user interface.
With the execution of this command, the system prompts to enter and confirm the password (up to 16
characters), and then locks the user interface.
To cancel the lock, press the
Enter
key and enter the correct password.
By default, the system will not lock the current user interface automatically.
Examples
# Lock the current user interface.
Please input password to lock current user terminal interface:
Password:
Again:
locked !