3Com S7902E Command Reference Manual - page 1927
1-3
Field
Description
Remaining
Number of remaining ACLs
display time-range
Syntax
display
time-range
{
time-range-name
|
all
}
View
Any view
Default Level
1: Monitor level
Parameters
time-range-name
: Time range name comprising 1 to 32 characters. It is case insensitive and must start
with an English letter. To avoid confusion, this name cannot be all.
all
: All existing time ranges.
Description
Use the
display
time-range
command to display the configuration and state of a specified or all time
ranges.
A time range is active if the system time falls into its range, and if otherwise, inactive.
Examples
# Display the configuration and state of time range trname.
Current time is 22:20:18 1/5/2006 Thursday
Time-range : trname ( Inactive )
from 15:00 1/28/2006 to 15:00 1/28/2008
Table 1-2
Description on the fields of the
display time-range
command
Field
Description
Current time
Current system time
Time-range
The configuration and state of time range, such as time range name, its
activated state, and start time and ending time.
time-range
Syntax
time-range
time-range-name
{
start-time
to
end-time
days
[
from time1 date1
] [
to time2 date2
] |
from
time1 date1
[
to time2 date2
] |
to time2 date2
}