3Com S7902E Command Reference Manual - page 1803
3-6
key (HWTACACS scheme view)
Syntax
key
{
accounting
|
authentication
|
authorization
}
string
undo key
{
accounting
|
authentication
|
authorization
}
string
View
HWTACACS scheme view
Default Level
2: System level
Parameters
accounting
: Sets the shared key for HWTACACS accounting packets.
authentication
: Sets the shared key for HWTACACS authentication packets.
authorization
: Sets the shared key for HWTACACS authorization packets.
string
: Shared key, a string of 1 to 16 characters.
Description
Use the
key
command to set the shared key for HWTACACS authentication, authorization, or
accounting packets.
Use the
undo key
command to remove the configuration.
By default, no shared key is configured.
Related commands:
display hwtacacs
.
Examples
# Set the shared key for HWTACACS accounting packets to
hello
for HWTACACS scheme
hwt1
.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
nas-ip (HWTACACS scheme view)
Syntax
nas-ip
ip-address
undo nas-ip
View
HWTACACS scheme view
Default Level
2: System level
Parameters
ip-address
: IP address in dotted decimal notation. It must be an address of the device and cannot be all