3Com S7902E Command Reference Manual - page 2235
1-32
When the PoE power is insufficient, power is first supplied to PSE with a higher power priority level.
Examples
# Set the power priority of PSE 7 to
critical
.
[Sysname] poe priority critical pse 7
poe pse-policy priority
Syntax
poe pse-policy priority
undo poe pse-policy priority
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
poe pse-policy priority
command to configure a PSE power management priority policy.
Use the
undo poe pse-policy priority
command to remove the PSE power management priority
policy.
By default, no PSE power management priority policy is configured.
Examples
# Configure a PSE power management priority policy.
[Sysname] poe pse-policy priority
poe update
Syntax
poe update
{
full
|
refresh
}
filename pse pse-id
View
System view
Default Level
2: System level
Parameters
full
: Specifies to upgrade the PSE processing software in full mode when the software is unavailable.