3Com S7902E Command Reference Manual - page 1169
1-12
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
Description
Use the
display pim bsr-info
command to view the BSR information in the PIM domain and the locally
configured C-RP information in effect.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Related commands:
c-bsr
,
c-rp
.
Examples
# View the BSR information in the PIM-SM domain in the public instance and the locally configured
C-RP information in effect.
VPN-Instance: public net
Elected BSR Address: 12.12.12.9
Priority: 0
Hash mask length: 30
State: Elected
Scope: Global
Uptime: 00:00:56
Next BSR message scheduled at: 00:01:14
Candidate BSR Address: 12.12.12.9
Priority: 0
Hash mask length: 30
State: Elected
Scope: Global
Candidate RP: 12.12.12.9(LoopBack1)
Priority: 0
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Candidate RP: 3.3.3.3(Vlan-interface1)
Priority: 20
HoldTime: 90
Advertisement Interval: 50
Next advertisement scheduled at: 00:00:28