3Com S7902E Command Reference Manual - page 687
1-18
Routing Table :
Summary Count : 3
Destination: 100::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 200::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 300::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Refer to
Table 1-6
for description about the above output.
display ipv6 routing-table ipv6-prefix
Syntax
display ipv6 routing-table ipv6-prefix
ipv6-prefix-name
[
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-prefix-name
: Name of the IPv6 prefix list, in the range 1 to 19 characters.
verbose
: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
Description
Use the
display ipv6 routing-table ipv6-prefix
command to display routes permitted by the IPv6
prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list
test2
.
Routes Matched by Prefix list test2 :
Summary Count : 1
Destination: 100::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Refer to
Table 1-6
for description about the above output.