3Com S7902E Command Reference Manual - page 1317
1-27
Parameters
group-address
: Clears the information about the specified multicast group. The value range of
group-address
is 224.0.1.0 to 239.255.255.255.
all
: Clears all IGMP Snooping multicast group information.
vlan vlan-id
: Clears the IGMP Snooping multicast group information in the specified VLAN. The
effective range of
vlan-id
is 1 to 4094.
Description
Use the
reset igmp-snooping group
command to clear IGMP Snooping multicast group information.
Note that:
z
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP
enabled on their VLAN interfaces.
z
This command cannot clear IGMP Snooping multicast group information of static joins.
Examples
# Clear all IGMP Snooping multicast group information.
reset igmp-snooping statistics
Syntax
reset igmp-snooping statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the
reset igmp-snooping statistics
command to clear the statistics information of IGMP
messages learned by IGMP Snooping.
Examples
# Clear the statistics information of all kinds of IGMP messages learned by IGMP Snooping.
router-aging-time (IGMP-Snooping view)
Syntax
router-aging-time
interval
undo router-aging-time