3Com S7902E Command Reference Manual - page 2296
1-3
Field
Description
Track IF
The interface to be tracked. It is displayed only after the
execution of the
vrrp vrid track interface
command.
Track Object
The object to be tracked. It is displayed only after the execution
of the
vrrp vrid track
command.
Pri Reduced
The priority value that is reduced when the monitored interface
is down or when the status of the monitored Track object turns
to
negative
.
It is displayed only after the execution of the
vrrp vrid track
interface
command or the
vrrp vrid track
command.
Switchover
Switchover mode. If the status of the monitored Track object
turns to
negative
, the backup will switch to the master
immediately.
Virtual IP
Virtual IP addresses of the VRRP group
Virtual MAC
Virtual MAC address corresponding to the virtual IP address of
the VRRP group. It is displayed only when the switch is in the
state of master.
Master IP
Primary IP address of the interface which belongs to the switch
in the state of master
display vrrp statistics
Syntax
display vrrp
statistics
[
interface
interface-type interface-number
[
vrid virtual-router-id
] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface
interface-type interface-number
: Displays VRRP statistics of the specified interface.
interface-type
interface-number
specifies an interface by its type and number.
vrid virtual-router-id
: Displays statistics of the specified VRRP group.
virtual-router-id
specifies a VRRP
group by its group number, in the range 1 to 255.
Description
Use the
display
vrrp statistics
command to display statistics about VRRP.
If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group
are displayed; if you only specify an interface, the statistics about all the VRRP groups on the interface
are displayed; if you specify neither, the statistics about all the VRRP groups on the device are
displayed.
Examples
# Display the statistics about all VRRP groups.