3Com S7902E Command Reference Manual - page 520
1-11
Parameters
all
: Displays the binding information of all DHCP address pools.
ip
ip-address
: Displays the binding information of a specified IP address.
pool
[
pool-name
]: Displays the binding information of a specified address pool. The
pool name
is a
string of 1 to 35 characters. If no
pool name
is specified, the binding information of all address pools is
displayed.
Description
Use the
display dhcp server ip-in-use
command to display the binding information of DHCP address
pool(s) or an IP address.
Related commands:
reset dhcp server ip-in-use
.
Examples
# Display the binding information of all DHCP address pools.
Global pool:
IP address Client-identifier/ Lease expiration Type
Hardware address
10.1.1.1 4444-4444-4444 NOT Used Manual
--- total 1 entry ---
Table 1-3
display dhcp server ip-in-use command output description
Field
Description
Global pool
Binding information of a DHCP address pool
IP address
Bound IP address
Client-identifier/Hardware address
Client’s ID or MAC of the binding
Lease expiration
Lease expiration time
Type
Binding types, including Manual, Auto:OFFERED and
Auto:COMMITTED.
z
Manual: Static binding
z
Auto:OFFERED: The binding sent in the DHCP-OFFER
message from the server to the client.
z
Auto:COMMITTED: The binding sent in the DHCP-ACK
message from the server to the client.
display dhcp server statistics
Syntax
display dhcp server statistics
View
Any view