3Com S7902E Command Reference Manual - page 259
1-7
traffic behavior
Syntax
traffic behavior
behavior-name
undo traffic behavior
behavior-name
View
System view
Default Level
2: System level
Parameters
behavior-name
: Behavior name, a string of 1 to 31 characters.
Description
Use the
traffic behavior
command to create a traffic behavior. This command also leads you to traffic
behavior view.
Use the
undo traffic classifier
command to remove a traffic behavior.
Related commands:
qos
policy
,
qos apply policy
,
classifier behavior
.
Examples
# Create a traffic behavior
behavior1
.
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]
traffic classifier
Syntax
traffic classifier
classifier-name
[
operator
{
and
|
or
} ]
undo traffic classifier
classifier-name
View
System view
Default Level
2: System level
Parameters
and
: Specifies the relationship between the match criteria in the specified class as logical AND. That is,
a packet belongs to the class only when it matches all the match criteria defined in the class.
or
: Specifies the relationship between the match criteria in the class as logical OR. That is, a packet
belongs to the class if it matches a match criterion defined in the class.
classifier-name
: Class name, a string of 1 to 31 characters.