3Com S7902E Command Reference Manual - page 1988
1-27
Description
Use the
user-interface
command to enter one or more user interface views to perform configuration.
Examples
# Enter VTY 0 user interface view.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0]
user privilege level
Syntax
user privilege level level
undo user privilege level
View
User interface view
Default Level
3: Manage level
Parameters
level
: Command level ranging from 0 to 3.
Description
Use the
user privilege level
command to configure the command level available to the users logging
into the user interface.
Use the
undo user privilege level
command to revert to the default command level.
By default, the commands of level 3 are available to the users logging into the AUX user interface. The
commands of level 0 are available to the users logging into VTY user interfaces.
Examples
# Configure that commands of level 0 are available to the users logging into VTY 0.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] user privilege level 0
# You can verify the above configuration by Telnetting to VTY 0 and displaying the available commands,
as listed in the following.
User view commands:
display Display current system information
ping Ping function
quit Exit from current command view