3Com S7902E Command Reference Manual - page 1188
1-31
holdtime join-prune (PIM view)
Syntax
holdtime join-prune interval
undo holdtime join-prune
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
interval
: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the
holdtime join-prune
command to configure the global value of the join/prune timeout time.
Use the
undo holdtime join-prune
command to restore the system default.
By default, the join/prune timeout time is 210 seconds.
Related commands:
holdtime assert
,
pim holdtime assert
,
pim holdtime join-prune
.
Examples
# Set the global value of the join/prune timeout time to 280 seconds in the public instance.
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
jp-pkt-size (PIM view)
Syntax
jp-pkt-size packet-size
undo jp-pkt-size
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
packet-size
: Maximum size of join/prune messages in bytes, with an effective range of 100 to 8,100.
Description
Use the
jp-pkt-size
command to configure the maximum size of join/prune messages.
Use the
undo jp-pkt-size
command to restore the system default.