3Com S7902E Command Reference Manual - page 1441
1-19
display bgp ipv6 multicast routing-table community-list
Syntax
display bgp ipv6 multicast routing-table community-list
{
basic-community-number
[
whole-match
] |
adv-community-number
}&
View
Any view
Default Level
1: Monitor level
Parameters
basic-community-number
: Basic community-list number, in the range 1 to 99.
adv-community-number
: Advanced community-list number, in the range 100 to 199.
whole-match
: Displays the IPv6 MBGP routes exactly matching the community attributes defined in
the specified
basic-community-number
.
&: Indicates that you can enter the preceding argument up to 16 times.
Description
Use the
display bgp ipv6 multicast routing-table community-list
command to display the IPv6
MBGP routing information matching the specified IPv6 MBGP community list.
Examples
# Display the IPv6 MBGP routing information matching the community list
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Refer to
Table 1-7
for description on the fields above.
display bgp ipv6 multicast routing-table dampened
Syntax
display bgp ipv6 multicast routing-table dampened
View
Any view