3Com S7902E Command Reference Manual - page 1605
1-22
z
At present, the S7900E series Ethernet switches do not support the control word option.
Related commands:
tunnel select-seq load-balance-number
in
MPLS L3VPN Commands
of the
MPLS Volume
.
Examples
# Create a Martini MPLS L2VPN connection.
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] mpls l2vc 2.2.2.9 999
mpls l2vpn
Syntax
mpls l2vpn
undo mpls l2vpn
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
mpls l2vpn
command to enable MPLS L2VPN.
Use the
undo mpls l2vpn
command to disable MPLS L2VPN and delete all L2VPN configurations.
You must use the
mpls l2vpn
command to enable MPLS L2VPN before configuring the other L2VPN
commands.
Examples
# Enable MPLS L2VPN.
[Sysname] mpls l2vpn
mpls l2vpn vpn-name
Syntax
mpls l2vpn
vpn-name
[
encapsulation
{
ethernet
|
vlan
} [
control-word
|
no-control-word
] ]
undo mpls l2vpn
vpn-name
View
System view, MPLS L2VPN view