3Com S7902E Command Reference Manual - page 1835
2-1
2
EAD Fast Deployment Configuration Commands
EAD Fast Deployment Configuration Commands
dot1x free-ip
Syntax
dot1x free-ip ip-address
{
mask-address
|
mask-length
}
undo dot1xfree-ip
{
ip-address
{
mask | mask-length
} |
all
}
View
System view
Default Level
2: System level
Parameters
ip-address
: IP address of the freely accessible network segment, also called a free IP.
mask
: Mask of the freely accessible network segment.
mask-length
: Length of the mask of the freely accessible network segment.
all
: Specifies all the freely accessible network segments.
Description
Use the
dot1x free-ip
command to configure a freely accessible network segment, that is, a network
segment that users can access before passing 802.1X authentication.
Use the
undo dot1x free-ip
command to remove one or all freely accessible network segments.
By default, no freely accessible network segment is configured.
Note that:
z
The free IP function is mutually exclusive with the global MAC authentication function, the port
security function, and the guest VLAN function on a port.
z
The free IP function is effective only when the port access control mode is
auto
.
z
The maximum number of freely accessible network segments is four now..
Related commands:
display dot1x
.
Examples
# Configure 192.168.0.0 as a freely accessible network segment.
[Sysname] dot1x free-ip 192.168.0.0 24