3Com S7902E Command Reference Manual - Rmon Configuration Commands
1-1
1
RMON Configuration Commands
RMON Configuration Commands
display rmon alarm
Syntax
display rmon alarm
[
entry
-
number
]
View
Any view
Default Level
1: Monitor level
Parameters
entry
-
number
: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is specified, the
configuration of all alarm entries is displayed.
Description
Use the
display rmon alarm
command to display the configuration of the specified or all RMON alarm
entries.
Related commands:
rmon alarm
.
Examples
# Display the configuration of all RMON alarm table entries.
AlarmEntry 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1
Sampling interval : 10(sec)
Rising threshold : 50(linked with event 1)
Falling threshold : 5(linked with event 2)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 1-1 display rmon alarm
command output description
Field
Description
AlarmEntry
Alarm entry, corresponding to the management information base
(MIB) node alarmIndex.
owned by
Owner of the entry, user1 in this example, corresponding to the MIB
node alarmOwner.