3Com S7902E Command Reference Manual - page 1757
1-16
display connection
Syntax
display
connection
[
access-type
{
dot1x
|
mac-authentication
|
portal
} |
domain
isp-name
|
interface interface-type interface-number
|
ip ip-address
|
mac
mac-address
|
ucibindex ucib-index
|
user-name user-name
|
vlan
vlan-id
] [
slot slot-number
]
View
Any view
Default Level
1: Monitor level
Parameters
access-type
{
dot1x
|
mac-authentication
|
portal
}: Specifies user connections of an access mode,
that is, 802.1X user connections, MAC authentication user connections, or portal authentication user
connections.
domain
isp-name
: Specifies all user connections of an ISP domain. The
isp-name
argument refers to
the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface
interface-type interface-number
: Specifies all user connections of an interface.
ip
ip-address
: Specifies all user connections using the specified IP address.
mac
mac-address
: Specifies all user connections using the specified MAC address. The MAC address
must be in the format of
H-H-H.
ucibindex
ucib-index
: Specifies all user connections using the specified connection index. The value
range 0 to 4294967295.
user-name
user-name
: Specifies all user connections using the specified username. The
user-name
argument is a case-sensitive string of 1 to 80 characters and must contain the domain name. If you
enter a username without any domain name, the system assumes that the default domain name is used
for the username.
vlan
vlan-id
: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to 4094.
slot slot-number
: Specifies the connections on a slot.
Description
Use the
display connection
command to display information about specified or all AAA user
connections.
This command does not apply to FTP user connections.
Related commands:
cut connection
.
Examples
# Display information about all AAA user connections.
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.