3Com S7902E Command Reference Manual - page 2150
1-13
rmon event
Syntax
rmon
event
entry-number
[
description
string
] {
log
|
log-trap
log
-
trapcommunity | none
|
trap
trap
-
community
} [
owner
text
]
undo rmon event entry
-
number
View
System view
Default Level
2: System level
Parameters
entry-number
: Event entry index, in the range 1 to 65,535.
description
string
: Event description, a string of 1 to 127 characters.
log
: Logs the event when it occurs.
log-trap log
-
trapcommunity
: Log and trap events. The system performs both logging and trap sending
when the event occurs.
log
-
trapcommunity
indicates the community name of the network management
station that receives trap messages, a string of 1 to 127 characters.
none
: Performs no action when the event occurs.
trap trap
-
community
: Trap event. The system sends a trap with a community name when the event
occurs.
trap
-
community
specifies the community name of the network management station that
receives trap messages, a string of 1 to 127 characters.
owner text
: Owner of the entry, a string of 1 to 127 characters. It is case sensitive and space is
supported.
Description
Use the
rmon event
command to create an entry in the RMON event table.
Use the
undo rmon event
command to remove a specified entry from the RMON event table.
When create an event entry, you can define the actions that the system will takes when the event is
triggered by its associated alarm in the alarm table. According to your configuration, the system can log
the event, send a trap, do both, or do neither at all.
Related commands:
display rmon event
,
rmon alarm
,
rmon prialarm
.
z
When you create an entry, if the values of the specified event description (
description
string
),
event type (
log
,
trap
,
logtrap
or
none
), and community name (
trap
-
community
or
log
-
trapcommunity)
are identical to those of the existing event entry, the system considers their
configurations are the same and the creation fails.
z
You can create up to 60 alarm entries.