3Com S7902E Command Reference Manual - page 1893
1-6
Table 1-5 display ssh server session
command output description
Field
Description
Conn
Connected VTY channel
Ver
SSH server protocol version
Encry Encryption
algorithm
State
Status of the session, including: Init, Ver-exchange, Keys-exchange,
Auth-request, Serv-request, Established, Disconnected
Retry
Number of authentication attempts
SerType
Service type (SFTP, Stelnet)
Username
Name of a user during login
display ssh server-info
Syntax
display ssh server-info
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ssh server-info
command on a client to display mappings between SSH servers and
their host public keys saved on the client.
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, you can use this command to check the public
key of the server saved on the client.
Related commands:
ssh client authentication server
.
Examples
# Display the mappings between host public keys and SSH servers saved on the client.
Server Name(IP) Server public key name
______________________________________________________
192.168.0.1 abc_key01
192.168.0.2 abc_key02