3Com S7902E Command Reference Manual - page 1868
1-2
Index is 2, OUI value is 003c12
GigabitEthernet2/0/1 is link-down
Port mode is UserloginWithOUI
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max MAC address number is 50
Stored MAC address number is 0
Authorization is ignored
GigabitEthernet2/0/2 is link-down
Port mode is noRestriction
NeedtoKnow mode is disabled
Intrusion mode is no action
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
Table 1-1 display port-security
command output description
Field
Description
Equipment port-security is enabled
Port security is enabled.
AddressLearn trap is enabled
Address learning trap is enabled.
Intrusion trap is enabled
Intrusion protection trap is enabled.
Dot1x logon trap is enabled
802.1X logon trap is enabled.
Dot1x logoff trap is enabled
802.1X logoff trap is enabled.
Dot1x logfailure is enabled
802.1X authentication failure trap is enabled.
RALM logon trap is enabled
MAC authentication success trap is enabled.
RALM logoff trap is enabled
MAC authenticated user logoff trap is enabled.
RALM logfailure trap is enabled
MAC authentication failure trap is enabled.
Disableport Timeout
Silence timeout of the port, in seconds.
OUI value
24-bit OUI value
Index OUI
index
Port mode is UserloginWithOUI
The port security mode is UserloginWithOUI.
NeedtoKnow mode is needtoknowonly
The NTK mode is needtoknowonly.
Intrusion mode is disableport
Intrusion protection action is set to
disableport
.
Max MAC address number
Maximum number of secure MAC addresses
allowed on the port
Stored MAC address number
Number of MAC addresses stored
Authorization is ignored
Authorization information from the server is
ignored. By default, the information takes effect
and this field is displayed as “Authorization is
permitted.”