3Com S7902E Command Reference Manual - page 370
2-32
Parameters
uni-number
: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
vlan-id
: Multicast VLAN ID, in the range 1 to 4094.
&
means that you can provide up to 50 VLAN
IDs for this argument.
all
: Specifies all the multicast VLAN IDs.
Description
Use the
uni multicast vlan
command to add a UNI to the specified multicast VLAN(s).
Use the
undo
uni multicast vlan
command to remove a UNI from the specified multicast VLAN(s).
This command takes effect only when the ONU works in the IGMP snooping mode.
Related commands:
multicast-mode
.
Examples
# Add UNI 1 to multicast VLAN 200 and multicast VLAN 3000.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast vlan 2000 3000
uni multicast-control multicast-address
Syntax
uni uni-number multicast-control multicast-address
{
multicast-address
[
to multicast-address
] }
& [
source-ip
ip-address
[
to
ip-address
] ]
rule
{
deny
|
permit
[
channel-limit
channel-number
]
|
preview
time-slice
preview-time
[
preview-interval
interval-time
|
preview-times preview-times
[
reset-interval
reset-interval-time
] ]* }
undo uni uni-number multicast-control multicast-address
[
multicast-address
[
to
multicast-address
] ] &
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number
: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
multicast-address
: Multicast IP address(es).
&
means that you can specify up to 10 multicast IP
addresses/multicast IP address ranges.
ip-address
: IP address of the multicast source
deny
: Denies access.
permit
: Permits access.
channel-number
: Number of channels that can be accessed at the same time, in the range 1 to 5.