3Com S7902E Command Reference Manual - page 1390
1-19
register
: Specifies the register interface. This keyword is valid only if
mode-type
is not specified or is
sm
.
outgoing-interface
: Displays routing entries that contain the specified interface as the outgoing
interface.
include
: Displays routing entries of which the outgoing interface list includes the specified interface.
exclude
: Displays routing entries of which the outgoing interface list excludes the specified interface.
match
: Displays routing entries of which the outgoing interface list includes only the specified interface.
mode mode-type
: Specifies an IPv6 PIM mode, where
mode-type
can have the following values:
z
dm
: Specifies IPv6 PIM-DM.
z
sm
: Specifies IPv6 PIM-SM.
z
ssm
: Specifies IPv6 PIM-SSM.
flags flag-value
: Displays IPv6 PIM routing entries containing the specified flag(s). The values of
flag-value
and their meanings are as follows:
z
act
: Specifies IPv6 multicast routing entries to which actual data has arrived.
z
del
: Specifies IPv6 multicast routing entries scheduled to be deleted.
z
exprune
: Specifies multicast routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
z
ext
: Specifies IPv6 routing entries containing outgoing interfaces provided by other IPv6 multicast
routing protocols.
z
loc
: Specifies IPv6 multicast routing entries on routers directly connecting to the same subnet with
the IPv6 multicast source.
z
niif
: Specifies IPv6 multicast routing entries containing unknown incoming interfaces.
z
nonbr
: Specifies routing entries with IPv6 PIM neighbor searching failure.
z
rpt
: Specifies routing entries on RPT branches where (S, G) prunes have been sent to the RP.
z
spt
: Specifies routing entries on the SPT.
z
swt
: Specifies routing entries in the process of RPT-to-SPT switchover.
z
wc
: Specifies wildcard routing entries.
fsm
: Displays the detailed information of the finite state machine (FSM).
Description
Use the
display pim ipv6 routing-table
command to view IPv6 PIM routing table information.
Related commands:
display ipv6 multicast routing-table
in the
IPv6 Multicast Routing and
Forwarding Commands
in the
IP Multicast Volume
.
Examples
# View the content of the IPv6 PIM routing table.
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
Protocol: pim-dm, Flag:
UpTime: 00:04:24
Upstream interface: Vlan-interface1
Upstream neighbor: FE80::A01:100:1
RPF prime neighbor: FE80::A01:100:1