3Com S7902E Command Reference Manual - page 1682
1-4
z
Fast Ethernet port: 64 to 100000
z
GigabitEthernet port: 64 to 1000000
z
Ten-GigabitEthernet port: 64 to 10000000
Note that the
committed-information-rate
argument must be a multiple of 64.
cbs committed-burst-size
: Specifies the committed burst size in bytes.
z
The committed-burst-size argument ranges from 4000 to 16000000.
z
If the
cbs
keyword is not used, the system uses the default committed burst size, that is, 62.5 ms x
committed-information-rate, or 16000000 if the multiplication is more than 16000000.
Description
Use the
qos lr outbound
command to limit the rate of outbound traffic via physical interfaces.
Use the
undo qos lr outbound
command to cancel the limit.
Examples
# Limit the outbound traffic rate on GigabitEthernet 2/0/1 within 640 kbps.
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos lr outbound cir 640