3Com S7902E Command Reference Manual - page 1724
5-1
5
Priority Mapping Configuration Commands
Priority Mapping Table Configuration Commands
display qos map-table
Syntax
display qos map-table
[
dot1p-dp
|
dot1p-lp
|
dscp-dot1p
|
dscp-dp
|
dscp-dscp
]
View
Any view
Default Level
1: Monitor level
Parameters
dot1p-lp
: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp
: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp
: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p
: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp
: Specifies the DSCP-to-DSCP mapping table.
Description
Use the
display qos map-table
command to display the configuration of a priority mapping table.
If the type of the priority mapping table is not specified, the configuration of all the priority mapping
tables is displayed.
Related commands:
qos map-table
.
Examples
# Display the configuration of the 802.1p precedence-to-drop precedence mapping table.
MAP-TABLE NAME: dot1p-dp TYPE: pre-define
IMPORT : EXPORT
0 : 2
1 : 2
2 : 2
3 : 1
4 : 1
5 : 1
6 : 0
7 : 0