3Com S7902E Command Reference Manual - page 1703
2-21
Direction: Inbound
Policy: abc_policy
Classifier: abc
Operator: AND
Rule(s) : If-match dscp cs1
Behavior: abc
Committed Access Rate:
CIR 640 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Table 2-7
Description on the fields of the
display qos policy interface
command
Field
Description
Interface
Port name, comprising of port type and port number
Direction
Direction of the port where the policy is applied
Policy
Name of the policy applied to the port
Classifier
Name of the class in the policy and its configuration
Failed
indicates that the policy is not successfully applied
Operator
Logical relationship among the classification rules in a class
Rule(s)
Classification rules in the class
Behavior
Name of the behavior in the policy and its configuration
display qos vlan-policy
Syntax
display qos vlan-policy
{
name
policy-name
|
vlan
[
vlan-id
]
} [
slot
slot-id
]
View
Any view
Default Level
1: Monitor level
Parameters
name
policy-name
: Specifies to display the information about the VLAN policy with the specified name.
vlan
vlan-id
: Specifies to display the information about the VLAN policy applied to the specified VLAN.
slot-id
: Specifies to display the information about the VLAN policies applied to VLANs on the board
seated in the specific slot. If the
slot-id
argument is not specified, this command displays the information
about the VLAN policies applied to the SRPU.