3Com S7902E Command Reference Manual - page 950
1-10
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
# Restore the default.
[Sysname-ripng-100] undo maximum load-balancing
preference
Syntax
preference
[
route-policy
route-policy-name
]
preference
undo preference
[
route-policy
]
View
RIPng view
Default Level
2: System level
Parameters
route-policy-name
: Name of a routing policy, in the range of 1 to 19 characters.
preference
: RIPng route priority, in the range of 1 to 255.
Description
Use the
preference
command to specify the RIPng route priority.
Use the
undo preference
route-policy
command to restore the default.
By default, the priority of a RIPng route is 100.
Using the
route-policy
keyword can set a priority for routes filtered in by the routing policy:
z
If a priority is set in the routing policy, the priority applies to matched routes, and the priority set by
the
preference
command applies to routes not matched.
z
If no priority is set in the routing policy, the one set by the
preference
command applies to all
routes.
Examples
# Set the RIPng route priority to 120.
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
# Restore the default RIPng route priority.
[Sysname-ripng-100] undo preference
ripng
Syntax
ripng
[
process-id
]
undo
ripng
[
process-id
]