- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 2047
of
2327
Go
1-33
Use the
temperature
-
limit
command to set the temperature alarm threshold on a board.
Use the
undo
temperature
-
limit
command to restore the temperature alarm threshold to the default.
By default, the temperature alarm thresholds for a board are as follows:
z
Upper limit: 80°C (176°F)
z
Lower limit: 0°C (32°F)
The
upper-value
argument must be bigger than the
lower-level
argument.
Examples
# Set the lower temperature limit on board 1 to 10 Celsius degrees and the upper temperature limit to 75
Celsius degrees.
[Sysname] temperature-limit 1 10 75
Setting temperature limit succeeded.