3Com S7902E Command Reference Manual - page 1842
1-4
[Sysname] mac-authentication interface GigabitEthernet 2/0/1
Mac-auth is enabled on port GigabitEthernet2/0/1.
Or
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] mac-authentication
Mac-auth is enabled on port GigabitEthernet2/0/1.
mac-authentication domain
Syntax
mac-authenticationdomain isp-name
undo mac-authenticationdomain
View
System view
Default Level
2: System level
Parameters
isp-name
: ISP domain name, a case-insensitive string of 1 to 24 characters that cannot contain any
forward slash (/), colon (:), asterisk (*), question mark (?), less-than sign (), or @.
Description
Use the
mac-authentication domain
command to specify the ISP domain for MAC authentication.
Use the
undo mac-authentication domain
command to restore the default.
By default, the default ISP domain is used for MAC authentication users. For information about the
default ISP domain, refer to the
domain defaultenable
command in
AAA Commands
of the
Security
Volume
.
Examples
# Specify the ISP domain for MAC authentication as domain1.
[Sysname] mac-authentication domain domain1
mac-authentication timer
Syntax
mac-authentication
timer
{
offline-detect
offline-detect-value
|
quiet
quiet-value
|
server-timeout
server-timeout-value
}
undo mac-authentication
timer
{
offline-detect
|
quiet
|
server-timeout
}
View
System view