3Com S7902E Command Reference Manual - page 1265
1-29
Parameters
acl-number
: Number of an ACL used to filter outgoing routing information, ranging from 2000 to 3999.
ip-prefix-name
: Name of an IP prefix list used to filter outgoing routing information, a string of 1 to 19
characters.
direct
: Filters direct routes.
isis process-id
: Filters outgoing routes redistributed from an ISIS process. The process ID is in the
range 1 to 65535.
ospf process-id
: Filters outgoing routes redistributed from the OSPF process with an ID from 1 to
65535.
rip process-id
: Filters outgoing routes redistributed from a RIP process. The process ID is in the range
1 to 65535.
static
: Filters static routes.
Description
Use the
filter-policy export
command to configure the filtering of outgoing routes.
Use the
undo filter-policy export
command to remove the filtering.
By default, the filtering is not configured.
If no routing protocol is specified, all redistributed routes are filtered.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter all outgoing routes.
[Sysname]bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] filter-policy 2000 export
filter-policy import (MBGP Family view)
Syntax
filter-policy
{
acl-number
|
ip-prefix ip-prefix-name
}
import
undo filter-policy import
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
acl-number
: Number of an ACL used to filter incoming routing information, ranging from 2000 to 3999.
ip-prefix-name
: Name of an IP prefix list used to filter incoming routing information, a string of 1 to 19
characters.