3Com S7902E Command Reference Manual - page 773
1-41
Examples
# Configure the maximum LSA generation interval as 2 seconds, minimum interval as 100 milliseconds
and incremental interval as 100 milliseconds.
[Sysname] ospf 100
[Sysname-ospf-100] lsa-generation-interval 2 100 100
lsdb-overflow-limit
Syntax
lsdb-overflow-limit
number
undo lsdb-overflow-limit
View
OSPF view
Default Level
2: System level
Parameters
number
: Specifies the upper limit of external LSAs in the LSDB, in the range 1 to 1000000.
Description
Use the
lsdb-overflow-limit
command to specify the upper limit of external LSAs in the LSDB.
Use the
undo
lsdb-overflow-limit
command to restore the default.
External LSAs in the LSDB are unlimited by default.
Examples
# Specify the upper limit of external LSAs as 400000.
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-limit 400000
maximum load-balancing (OSPF view)
Syntax
maximum load-balancing
maximum
undo maximum load-balancing
View
OSPF view
Default Level
2: System level