3Com S7902E Command Reference Manual - page 1056
1-41
[Sysname-bgp-af-ipv6] peer 1:2::3:4 public-as-only
peer reflect-client (IPv6 address family view)
Syntax
peer
{
group-name
|
ipv4-address
|
ipv6-address
}
reflect-client
undo peer
{
group-name
|
ipv4-address
|
ipv6-address
}
reflect-client
View
IPv6 address family view
Default Level
2: System level
Parameters
group-name
: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address
: IPv4 address of a peer.
ipv6-address
: IPv6 address of a peer.
Description
Use the
peer reflect-client
command to configure the router as a route reflector and specify a
peer/peer group as a client.
Use the
undo peer reflect-client
command to remove the configuration.
By default, neither route reflector nor client is configured.
Related commands:
reflect between-clients
,
reflector cluster-id
.
Examples
# Configure the local device as a route reflector and specify the peer group
test
as a client.
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test
[Sysname-bgp-af-ipv6] peer test reflect-client
peer route-limit (IPv6 address family view)
Syntax
peer
{
group-name
|
ipv4-address
|
ipv6-address
}
route-limit
prefix-number
[ {
alert-only
|
reconnect
reconnect-time
} |
percentage
] *
undo peer
{
group-name
|
ipv4-address
|
ipv6-address
}
route-limit
View
IPv6 address family view
Default Level
2: System level