3Com S7902E Command Reference Manual - page 1395
1-24
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120
hello-option lan-delay (IPv6 PIM view)
Syntax
hello-option lan-delay
interval
undo hello-option lan-delay
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval
: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use the
hello-option lan-delay
command to configure the global value of the LAN-delay time.
Use the
undo hello-option lan-delay
command to restore the system default.
By default, the LAN-delay time is 500 milliseconds.
Related commands:
hello-option override-interval
,
pim ipv6 hello-option override-interval
,
pim
ipv6 hello-option lan-delay
.
Examples
# Set the LAN-delay to 200 milliseconds globally.
[Sysname] pim ipv6
[Sysname-pim6] hello-option lan-delay 200
hello-option neighbor-tracking (IPv6 PIM view)
Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
View
IPv6 PIM view
Default Level
2: System level
Parameters
None