3Com S7902E Command Reference Manual - page 454
1-4
Description
Use the
display rrpp ring-group
command to display the ring group configuration. If no ring group ID is
specified, the configuration of all ring groups is displayed. For an edge node ring group, the subring
sending Edge-Hello packets is also displayed.
Related commands:
domain ring
.
Examples
# Display the ring group configuration.
Ring Group 1:
domain 1 ring 1 to 3, 5
domain 2 ring 1 to 3, 5
domain 1 ring 1 send Edge-Hello packet
Ring Group 2:
domain 1 ring 4, 6 to 7
domain 2 ring 4, 6 to 7
Table 1-2 display rrpp ring-group
command output description
Field
Description
Ring Group xx
RRPP ring group ID
domain xx
ring
xx
Subrings in the ring group
domain xx
ring
xx send
Edge-Hello packet
The subring sending Edge-Hello packets in the ring group
display rrpp statistics
Syntax
display rrpp statistics
domain
domain-id
[
ring ring-id
]
View
Any view
Default Level
1: Monitor level
Parameters
domain-id
: RRPP domain ID, in the range 1 to 8.
ring-id
: RRPP ring ID, in the range 1 to 64.
Description
Use the
display rrpp statistics
command to display RRPP message statistics.
Note that: