3Com S7902E Command Reference Manual - page 145
1-3
display dldp statistics
Syntax
display dldp statistics
[
interface-type interface-number
]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number
: Port type and port number.
Description
Use the
display dldp statistics
command to display the statistics on the DLDP packets passing
through a port.
If you do not provide the
interface-type
or
interface-number
argument, this command displays the
statistics on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
Interface GigabitEthernet2/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Interface GigabitEthernet2/0/2
Packets sent : 7
Packets received : 7
Invalid packets received : 3
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 4
# Display the statistics on the DLDP packets passing through GigabitEthernet 2/0/1.
Interface GigabitEthernet2/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3