3Com S7902E Command Reference Manual - page 568
4-12
Description
Use the
reset dhcp-snooping
command to clear DHCP snooping binding information.
For the S7900E series Ethernet switches, DHCP snooping binding information on all slots will be
cleared after you execute this command.
Examples
# Clear all DHCP binding information.
reset dhcp-snooping packet statistics
Syntax
reset dhcp-snooping packet statistics
[
slot
slot-number
]
View
User view
Default Level
2: System level
Parameters
slot
slot-number
: Clears the DHCP packet statistics of the board in a specified slot.
Description
Use the
reset dhcp-snooping packet statistics
command to clear DHCP packet statistics on the
DHCP snooping device.
On the S7900E series Ethernet switches, executing the
reset dhcp-snooping packet statistics
command without the
slot
keyword only clears DHCP packet statistics on the SRPU.
Examples
# Clear DHCP packet statistics on the DHCP snooping device.