3Com S7902E Command Reference Manual - page 1408
1-37
View
Interface view
Default Level
2: System level
Parameters
interval
: Graft retry period in seconds, with an effective range of 1 to 65,535.
Description
Use the
pim ipv6 timer graft-retry
command to configure the graft retry period.
Use the
undo pim ipv6 timer graft-retry
command to restore the system default.
By default, the graft retry period is 3 seconds.
Examples
# Set the graft retry period to 80 seconds on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 timer graft-retry 80
pim ipv6 timer hello
Syntax
pim ipv6 timer hello
interval
undo pim ipv6 timer hello
View
Interface view
Default Level
2: System level
Parameters
interval
: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the
pim ipv6 timer hello
command to configure on the current interface the interval at which hello
messages are sent.
Use the
undo pim ipv6 timer hello
command to restore the system default.
By default, hello messages are sent at the interval of 30 seconds.
Related commands:
timer hello
.
Examples
# Set the hello interval to 40 seconds on VLAN-interface 100.