3Com S7902E Command Reference Manual - page 1432
1-10
prefix-length
: Prefix length, in the range 0 to 128.
longer-match
: Displays routes matching the specified prefix.
verbose
: Displays both detailed active and inactive routing information permitted by the ACL. Without
this keyword, only the brief information about active routes permitted by the ACL is displayed.
Description
Use the
display ipv6 multicast routing-table ipv6-address
prefix-length
command to display the
multicast routing information for the specified destination IPv6 address.
Examples
# Display brief information about the specified multicast route.
Routing Table:
Summary Count 1
Destination : 4:: PrefixLength : 32
NextHop : 3::1 Preference : 60
Interface : Vlan-interface1 Protocol : Static
State : Active Adv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 19174sec
# Display the brief route information falling into the specified network.
Routing Tables:
Summary Count 2
Destination : 4:: PrefixLength : 32
NextHop : 3::1 Preference : 60
Interface : Vlan-interface1 Protocol : Static
State : Active Adv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 766sec
Destination : 4:4:: PrefixLength : 64
NextHop : 3::1 Preference : 60
Interface : Vlan-interface1 Protocol : Static
State : Active Adv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 766sec
# Display the detailed route information falling into the specified network.
Routing Tables:
Summary count:1
Destination : 4:4:: PrefixLength : 64
NextHop : 3::1 Preference : 60
Interface : Vlan-interface1 Protocol : Static
State : Active Adv Cost : 0
Age : 19547sec