3Com S7902E Command Reference Manual - page 1161
1-4
Examples
# Enable administrative scoping in the public instance.
[Sysname] pim
[Sysname-pim] c-bsr admin-scope
c-bsr global
Syntax
c-bsr global
[
hash-length hash-length
|
priority
priority
] *
undo c-bsr global
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
hash-length
: Hash mask length in the global scope zone, in the range of 0 to 32. If you do not include
this argument in your command, the corresponding global setting will be used.
priority
: Priority of the C-BSR in the global scope zone, in the range of 0 to 255. If you do not include this
argument in your command, the corresponding global setting will be used. A larger value of this
argument means a higher priority.
Description
Use the
c-bsr global
command to configure a C-BSR for the global scope zone.
Use the
undo c-bsr
global
command to remove the C-BSR configuration for the global scope zone.
By default, no C-BSRs are configured for the global scope zone.
Related commands:
c-bsr group
,
c-bsr hash-length
,
c-bsr priority
.
Examples
# Configure the router to be a C-BSR for the global scope zone in the public instance, with the priority of
1.
[Sysname] pim
[Sysname-pim] c-bsr global priority 1
c-bsr group
Syntax
c-bsr group group-address
{
mask | mask-length
}
[
hash-length hash-length
|
priority
priority
] *
undo c-bsr group
group-address