3Com S7902E Command Reference Manual - page 1587
1-4
[Sysname] mpls l2vpn vpn1
[Sysname-mpls-l2vpn-vpn1] ce ce1
[Sysname-mpls-l2vpn-ce-vpn1-ce1] connection ce-offset 1 interface vlan-interface 10
display bgp l2vpn
Syntax
display bgp l2vpn
{
all
|
group
[
group-name
] |
peer
[ [
ip-address
]
verbose
] |
route-distinguisher
route-distinguisher
[
ce-id
ce-id
[
label-offset
label-offset
] ] }
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays all L2VPN information.
group-name
: Name of the peer group, a string of 1 to 47 characters.
ip-address
: IP address of the peer.
verbose
: Displays detailed information.
route-distinguisher
: Route distinguisher in the format of nn:nn or IP-address:nn. It can be a string of 3 to
21 characters.
ce-id
: VPN CE ID of the MPLS L2VPN connection, in the range 0 to 199. A remote connection requires
the remote CE number.
label-offset
: Label offset, in the range 0 to 65,535.
Description
Use the
display bgp l2vpn
command to display information about BGP L2VPN in the BGP routing
table.
Related commands:
route-distinguisher.
Examples
# Display all information about L2VPN in the BGP routing table.
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
Route Distinguisher: 100:1
CE ID Label Offset Label Base nexthop pref as-path
1 0 8202 3.3.3.9 100