3Com S7902E Command Reference Manual - page 1048
1-33
[Sysname-bgp-af-ipv6] peer test description ISP1
peer ebgp-max-hop (IPv6 address family view)
Syntax
peer
{
ipv6-group-name | ipv6-address
}
ebgp-max-hop
[
hop-count
]
undo peer
{
ipv6-group-name | ipv6-address
}
ebgp-max-hop
View
IPv6 address family view
Default Level
2: System level
Parameters
ipv6-group-name
: Name of a peer group, a string of 1 to 47 characters.
ipv6-address
: IPv6 address of a peer.
hop-count
: Maximum hop count, in the range 1 to 255. By default, the value is 64.
Description
Use the
peer ebgp-max-hop
command to allow establishing the EBGP connection to a peer/peer
group indirectly connected.
Use the
undo peer ebgp-max-hop
command to remove the configuration.
By default, this feature is disabled.
You can use the argument
hop-count
to specify the maximum router hops of the EBGP connection.
Examples
# Allow establishing the EBGP connection with the peer group
test
on an indirectly connected network.
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test ebgp-max-hop
peer fake-as (IPv6 address family view)
Syntax
peer
{
ipv6-group-name | ipv6-address
}
fake-as
as-number
undo peer
{
ipv6-group-name | ipv6-address
}
fake-as
View
IPv6 address family view
Default Level
2: System level