3Com S7902E Command Reference Manual - page 682
1-13
display ip relay-route
Syntax
display ip relay-route
[
vpn-instance vpn-instance-name
]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name
: Displays the recursive route information of the VPN instance.
vpn-instance-name
is a string of 1 to 31 case-sensitive characters.
Description
Use the
display ip relay-route
command to display the information of recursive routes.
When executed with no argument, this command displays the recursive route information of the public
network routing table.
Examples
# Display recursive route information.
Total Number of Relay-route is: 1.
Dest/Mask: 40.40.40.0/255.255.255.0
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 1-4 display ip relay-route
command output description
Field
Description
Total Number of Relay-route
Total number of recursive routes
Dest/Mask Destination
address/mask of the recursive route
Related instance id(s)
The number in the parentheses after each instance ID
indicates the number of routes that have used the recursive
route in the routing table corresponding to the instance ID.
display ip relay-tunnel
Syntax
display ip relay-tunnel
View
Any view
Default Level
1: Monitor level