3Com S7902E Command Reference Manual - page 1977
1-16
View
VTY interface view
Default Level
3: Manage level
Parameters
all
: Supports both Telnet protocol and SSH protocol.
ssh
: Supports SSH protocol.
telnet
: Supports Telnet protocol.
Description
Use the
protocol inbound
command to configure the user interface to support specified protocols.
Both Telnet and SSH protocols are supported by default.
Related command:
user-interface vty
.
If you want to configure the user interface to support SSH, to ensure a successful login, you must first
configure the authentication mode to
scheme
on the user interface. If you set the authentication mode
to
password
or
none
, the
protocol inbound ssh
command will fail. Refer to
authentication-mode
.
Examples
# Configure VTY 0 to support only SSH protocol.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] protocol inbound ssh
screen-length
Syntax
screen-length
screen-length
undo
screen-length
View
User interface view
Default Level
2: System level