- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 499
of
2327
Go
2-3
Default Level
2: System level
Parameters
None
Description
Use the
proxy-arp enable
command to enable proxy ARP.
Use the
undo proxy-arp enable
command to disable proxy ARP.
By default, proxy ARP is disabled.
Related commands:
display proxy-arp
.
Examples
# Enable proxy ARP on VLAN-interface 2.
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] proxy-arp enable