3Com S7902E Command Reference Manual - page 1592
1-9
Field
Description
pref Preference
as-path
AS-PATH of the route
encap type
Encapsulation type
display ccc
Syntax
display ccc
[
ccc-name
ccc-name
|
type
{
local
|
remote
} ]
View
Any view
Default Level
1: Monitor level
Parameters
ccc-name
: CCC connection name, a string of 1 to 20 characters..
type
: Specifies the type of the CCC connections.
local
: Specifies local CCC connections.
remote
: Specifies remote CCC connections.
Description
Use the
display ccc
command to display information about CCC connections.
If you do not specify the connection name or type, this command displays information about all CCC
connections.
Examples
# Display information about CCC connection c1.
***Name : c1
Type : remote
State : down
Intf : Vlan-interface2 (up)
In-label : 100
Out-label : 200
Nexthop : 20.1.1.1
# Display information about all CCC connections.
Total ccc vc : 1
Local ccc vc : 0, 0 up
Remote ccc vc : 1, 0 up
***Name : c1
Type : remote