3Com S7902E Command Reference Manual - page 2110
1-5
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
ViewDefault is the default view of the device. When you access the device through the ViewDefault view,
you can access all the MIB objects of the iso subtree except for the MIB objects under the
snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees.
Table 1-3 display snmp-agent mib-view
command output description
Field
Description
View name
MIB view name
MIB Subtree
MIB subtree corresponding to the MIB view
Subtree mask
MIB subtree mask
Storage-type Storage
type
View Type
View type, which can be
included
or
excluded
:
z
Included indicates that all nodes of the MIB tree are included
in current view, namely, you are allowed to access all the
MIB objects of the subtree
z
Excluded indicates that none of the nodes of the MIB tree
are included in current view, namely, you are allowed to
access none of the MIB objects of the subtree
View status
The status of MIB view
display snmp-agent statistics
Syntax
display snmp-agent statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display snmp-agent statistics
command to display SNMP statistics.
Examples
# Display the statistics on the current SNMP.
1684 Messages delivered to the SNMP entity
5 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known