3Com S7902E Command Reference Manual - page 1699
2-17
Default Level
2: System Level
Parameters
behavior-name
: Name of the traffic behavior to be created.
Description
Use the
traffic behavior
command to create a traffic behavior. This command also leads you to traffic
behavior view.
Use the
undo traffic classifier
command to remove a traffic behavior.
Related commands:
qos
policy
,
qos apply policy
,
classifier behavior
.
Examples
# Define a traffic behavior named behavior1.
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]
QoS Policy Configuration Commands
classifier behavior
Syntax
classifier
classifier-name behavior behavior-name
[
mode do1q-tag-manipulation
]
undo classifier classifier-name
View
Policy view
Default Level
2: System Level
Parameters
classifier-name
: Name of an existing class.
behavior–name
: Name of an existing traffic behavior.
mode dot1q-tag-manipulation
: Specifies that the association relationship between the class and the
traffic behavior is used for the VLAN mapping function.
Description
Use the
classifier behavior
command to associate a traffic behavior with a class.
Use the
undo classifier
command to remove a class from a policy.
Note that each class can be associated with only one traffic behavior.
Related commands:
qos policy
.